Millstone Nederlandse Whisky Giftbox
SKU: 68103142889

Millstone Nederlandse Whisky Giftbox

Sale price$58.41 Regular price$64.90
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 5 - Jul 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Millstone Nederlandse Whisky GiftboxDe Millstone Nederlandse Whisky Giftbox bevat drie flesjes van 200 ml, elk een andere expressie van Millstone, de meest toonaangevende Nederlandse whisky distilleerderij. De set omvat een 100% rogge rye whisky op 50% ABV, een geturfde single malt met Pedro Ximnez sherry finish en een single malt met Oloroso sherry cask finish. Samen geven de drie flesjes een breed beeld van de stijlbreedte die Millstone beheerst: van krachtig en kruidig tot rokerig

De Millstone Nederlandse Whisky Giftbox bevat drie flesjes van 200 ml, elk een andere expressie van Millstone, de meest toonaangevende Nederlandse whisky-distilleerderij. De set omvat een 100% rogge rye whisky op 50% ABV, een geturfde single malt met Pedro Ximénez sherry finish en een single malt met Oloroso sherry cask finish. Samen geven de drie flesjes een breed beeld van de stijlbreedte die Millstone beheerst: van krachtig en kruidig tot rokerig-zoet en fruitig-rond. Verpakt in een luxe geschenkdoos.

Een uitgelezen kennismaking met Nederlands vakmanschap. Heel geschikt als cadeau of als persoonlijke proeverij van drie contrasterende stijlen.

Geur en smaakprofiel

  • Millstone Rye 100 Proof
    Neus: Peper, kaneel, toffee en een vleugje sinaasappel
    Smaak: Kruidig en vol, met karamel, roggebrood en donkere specerijen; lange, verwarmende afdronk met vanille
  • Millstone Peated PX
    Neus: Turfrook, pure chocolade, rozijnen en lichte kruiden
    Smaak: Rijke turfrook met zoete sherry, gedroogd fruit en een hint van espresso; lang en complex op de afdronk
  • Millstone Oloroso Sherry Cask
    Neus: Gedroogd fruit, sinaasappelschil, noten en specerije
    Smaak: Zoet en rijk, met karamel, chocolade en kruidige sherryinvloeden; medium lange, zachte afdronk met lichte houttoets

Verkrijgbaar in onze webshop en in onze slijterij in Amsterdam. Bestel online of kom langs voor persoonlijk advies.

Meer details over productie & het verhaal van de maker

Hoe worden de producten gemaakt?

De Millstone Rye 100 Proof is gedistilleerd van 100% rogge en gebotteld op 50% ABV zonder verdunning. Rogge als enig graan geeft een uitgesproken kruidigheid en structuur die bij lagere procentages minder uitgesproken is.

De Millstone Peated PX is een single malt die begint met geturfde gerst. De turf geeft de gist en het graan tijdens het mouten een rokerig karakter. Na de primaire rijping volgt een finish op Pedro Ximénez sherryvaten, die de rook omhullen met rozijn, gedroogd fruit en donkere zoetheid.

De Millstone Oloroso Sherry Cask Finish rijpt eerst op bourbon-ex-vaten, die vanille en lichte zoetheid inbrengen. Een tweede rijpingsfase op Oloroso sherryvaten voegt gedroogd fruit, noten en kruidige diepgang toe. De combinatie van beide vattypen geeft de whisky zijn gelaagde, ronde karakter.

Het verhaal van Millstone

Millstone is het whisky-label van Zuidam Distillers, opgericht in 1974 door Fred van Zuidam in Baarle-Nassau. Wat begon als een familiedistilleerderij voor jenever en likeur, groeide uit tot een van de meest gerespecteerde ambachtelijke distilleerderijen van Europa. Millstone whisky wordt sinds de jaren negentig geproduceerd en heeft internationaal erkenning gekregen met meerdere prijzen op World Whisky Awards en andere toonaangevende competities.

De distilleerderij werkt volledig familiaal: Patrick van Zuidam leidt vandaag de productie en bewaakt de kwaliteit van grondstof tot fles. Alle whisky's rijpen in het eigen magazijn in Noord-Brabant, onder Nederlandse klimaatomstandigheden die de rijping op een eigen manier beïnvloeden. Millstone toont dat Nederland een volwaardige whisky-natie is, geen imitatie van Schotse of Ierse stijlen, maar een eigen interpretatie met eigen grondstoffen en technieken.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 68103142889

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 891 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
P. Schmidt
Birmingham, US
★★★★★ 4
Good quality, bright, good light projection pattern, good choice for snowblowers
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
This review is ONLY for the Nilight model 1260LM (the package of TWO of them). This product has a flexible design, allowing it to be used in a variety of ways when you want to add illumination to a vehicle of some kind. It can be used as add-on fog lamps for trucks and off-road vehicle, it can be used as headlights for golf carts and such, and it is a good choice for adding headlights to snowblowers. The two mounting brackets allow swiveling and angling up and down for best aim and illumination pattern. Each 'lamp' assembly is mostly made of black anodized or black powder-coated aluminum, with a water-resistant design. The front 'lens' is Lexan or some other suitable clear plastic material with good, durable properties. The manufacturer claims that the included mounting hardware (bolts, nuts, washers) are stainless steel, but they seem to weigh too little to be SOLID stainless. Whatever they are made from, they do not attract strong (neodymium) magnets. Because I bought the lamps to use on my snowblower, I decided to replace the included hardware with solid stainless hardware. The large bolts for mounting the brackets are M8 x 1.25 and the smaller bolts for attaching the lamps to the brackets are M6 x 1.0. I also chose to purchase the smaller bolts with 'cap head' bolts, because it make lamp angle adjustment much quicker and easier. Each included bolt comes with a flat washer and a split-ring lockwasher, and the large bolts also come with nuts (the smaller bolts thread directly into pre-tapped holes in the lamp bodies). The included lockwashers make sense for the main mounting bracket bolts, but there is no reasonable place to use the lockwashers of the smaller bolts. I inquired of Nilight tech support, and they clearly had never thought about WHERE those lockwashers should be used, and they concluded that they probably should NOT actually be used. Each lamp has a short (perhaps 6") 'pigtail' cable coming out of one rear edge, and these cables each have a pair of wires inside; a RED one for + and a BLACK one for - . The user can wire these up any way that is desired, but probably they will be wired in parallel in most situations. I wish that the cables were longer; as it is, it is necessary to splice them to other cables in places that will not be hidden from view and/or otherwise protected from the elements. These lamps are designed to operate on 12VDC power, although the exact voltage is not critical. There is no need to use a special LED power supply, since the lamps include their own internal power conditioning circuitry. Powering these from 12VDC, EACH lamp will required 1A of current, to 2A total when wired in parallel. This comes to 12V x 2A = 24 Watts. In my case, I needed to power the lamps from a cordless power tool battery which produces a nominal 20VDC, which can drop as low as about 16V. Accordingly, I used one of the ubiquitous and inexpensive "DC Converters" (aka "DC-DC Converter") with an input having a voltage range that includes the expected 16~20V of the battery, and has a regulated 12V output, and has a Power (Watts) rating of at least twice the expected load, in this case a 60W one from Amazon. Since these converters have nearly a 100% efficiency, the input and output power (Watts) will be the same value, 24W. Doing the math in my case, an assuming an average battery voltage of 18V, the math is 24W / 18V = 1.3A. My battery has an Amp-Hour (Ah) of 4, so 4 / 1.3 = about 3 hours of operating time for the two lamps from a fully charged battery. My only gripes with the product have already been mentioned: - overly short power cords - poorly conceived hardware 'package'; the smaller lockwasher are useless, and the associated bolts should have had cap heads instead of hex heads (I won't complain about the lack of sold stainless steel hardware, since that would have driven the selling price WAY up)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
M
Verified Purchase
michael jones
Natrona Heights, US
★★★★★ 5
LOVE these LIGHTS !!!
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
i put 2 on the front of my 24" ariens snowthrower and it actually was to much !!! using one now and PLENTY of light !!! i have lots of dewalt batteries and i bought a adapter that allows me to put a battery in and has switch and fuse , wired to light and used one of my old 2AH batteries and it lasted 2.5 hours no problem , non stop . my newer batteries are 6 and 8 AH and last up to 8 hours before recharge . LOVE these LIGHTS !!! installing one on ladder rack on rear of truck . you know how many times that will be used on a late evening or early start so i can see to load or unload .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 6, 2026
I
Verified Purchase
ITO
Port Orchard, US
★★★★★ 5
Good bang for the buck.
Color: 2Pcs 18W LED Flood Light
I have bought 10 of these now. I put them on my work trailer and use them for reverse lights. They are cheap, easy to install, and they work very well. Now and then, I break one; they are exposed on my trailer and stuff happens, and these are so cheap it's not a big deal to replace them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 15, 2026
J
Verified Purchase
Jason Ross
Boise, US
★★★★★ 5
used for a snowblower light upgrade
Color: 2Pcs 18W LED Flood Light
I replaced the halogen bulb that came with my snowblower with these bad boys. Talk about a night and day difference! I was able to use two existing holes on the top of the blower and the included brackets to mount them. I also had to get a rectifier that converted the AC 24V to the 12V DC these expect. Used some scrap conduit, wire loom, and some project boxes to bring the whole thing together. Now the light is a lot brighter, and it's not half-blocked by the chute. Big improvement! You can find plenty of howtos and parts lists on youtube to do the same.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
D
Verified Purchase
Dan W
West Palm Beach, US
★★★★★ 3
use care when starting the bolts.
Color: 2Pcs 18W LED Flood Light
Had these for awhile before I got around to installing them or should say attempted to install these. Mounting the bracket was challenging with supplied bolts. The predrilled holes in the mounting block were very poorly threaded. It was almost impossible to get the bolts started without cross threading. The finished product was acceptable. I have other Nilight products and never experienced a single issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 7, 2026

recommand products