Moog MINITAUR Analog Bass Synthesizer (Black)
SKU: 63731656833

Moog MINITAUR Analog Bass Synthesizer (Black)

$337.05 $374.50
Save 10%
No.2 Bestseller on www.crpub.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 4 - Jul 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Moog MINITAUR Analog Bass Synthesizer (Black)The black Moog Minitaur Analog Bass Synthesizer is a programmable analog bass synthesizer designed with a one knob per function design, allowing you to adjust your sounds on the fly. The Minitaur's sound engine is powered by two oscillators with selectable sawtooth or square waveshapes. With the latest firmware upgrade, v2. 2 now offers up to 128 on board presets, five additional modulation sources, hard sync, assignable CV Gate inputs, and the

The black Moog Minitaur Analog Bass Synthesizer is a programmable analog bass synthesizer designed with a one-knob-per-function design, allowing you to adjust your sounds on the fly. The Minitaur's sound engine is powered by two oscillators with selectable sawtooth or square waveshapes. With the latest firmware upgrade, v2.2 now offers up to 128 on-board presets, five additional modulation sources, hard sync, assignable CV/Gate inputs, and the ability to only modulate oscillator 2.

The synth supports MIDI via 5-pin DIN and USB MIDI, which offers control over both playing and the Minitaur's LFO, allowing it to be used to create dubstep-style wobbles and sweeps. Its rear-panel control voltage inputs provide access for additional tweaking of your pitch, filter, and volume with external CV sources. Additionally, these CV/Gate inputs can be configured via the included free editor/librarian to control any feature on or under the hood. The 1/4" mono audio input allows you to use the Minitaur's filter and envelopes on other audio sources.

New Features in v2.2
  • Save and Recall up to 128 On-Board Presets: Select and save directly from your Minitaur’s front panel, via MIDI controller or with the free Minitaur Editor / Librarian software
  • Free Editor/Librarian Software: Seamless DAW integration now with full Windows support
  • Five New Modulation Sources: Tri, Sqr, Saw, Ramp, S&H and Filter EG
  • Hard Sync: Access a completely new sonic palette with your Minitaur
  • Modulate Oscillator 2 Only: Pair with Hard Sync for syncopated metallic sweeps and surges
  • Assignable CV/Gate Inputs: Control any feature on or under the hood of your Minitaur via control voltage
  • CV to MIDI Conversion: Bring control voltage into your DAW for analog control over digital circuits
General Features
  • Decay/Release mode allows for independent control of Decay and Release times from Minitaur's front panel
  • Pitch, Volume and Gate Controller inputs can be re-mapped to other control parameters
  • Minitaur can act as a CV to MIDI converter
  • One-knob-per-function interface for tweaking and creating new sounds on the fly
  • Two oscillators with Sawtooth (Original Taurus) and Square wave-shapes for each VCO. Recreate sounds of the original Taurus with Sawtooth waves, or create new sounds with square waves, or a combination of both
  • 2 Mixer VCAs for VCO levels control of Oscillators 1 and 2
  • Moog Ladder Filter with adjustable resonance delivers Taurus 1 and 3 bass and boom
  • Two Minimoog-style ADSR Envelope Generators for modulating VCF and VCA. The Decay and Release segments are controlled by the Decay knob, while the Release segment is enabled or disabled via Release On/Off switch
  • MIDI-syncable LFO with controls for Rate, VCO LFO Amount, and VCF LFO Amount
  • 5-pin DIN MIDI and MIDI over USB offer complete control of the Minitaur's sound engine
  • Analog Control inputs for Pitch, Filter, Volume and Gate. Use an EP2 or CV to connect and control Minitaur with everything from modulars to Moogerfoogers
  • External audio input for processing external audio through the Mixer and Filter section of Minitaur
  • Headphone output with 1/8" connection
  • Steel chassis

Specifications

Sound Engine
Analog
Presets
128
Polyphony
Monophonic (can be poly-chained)
External Control
External Controller Response: Keyboard, pitch bend, mod wheel, after pressure, and velocity
Oscillators
Oscillator 1:
Wave: Sawtooth/Square
Level: 0 to 100%

Oscillator 2:
Frequency: +/-12 Semitones
Wave: Sawtooth/Square
Level: 0 to 100%

Glide Rate: 0 to 100%
Calibration Range
Oscillator Calibration Range: 22 Hz to 6.8 kHz
Note range at 8' = 18 to 116
Glides
Glide: Select LCR, LCT, EXP - Legato On/Off
Filters
Moog Ladder Filter:
Cutoff: 20 Hz to 20 kHz
Resonance: 0 to Self-Oscillation
Filter Envelope Amount: -100 to 100%
Modulation
LFO Rate with Rate LED: 0.01 to 100 Hz
Wave: Triangle
Amount to VCO: 0 to 100%
Amount to VCF: 0 to 100%

Modulation Sources: LFO (triangle, square, saw, ramp, sample & hold), filter envelope
Modulation Destinations: Oscillator pitch, oscillator 2 pitch only, filter cutoff
Envelope Generators
2x Envelope Generators
Attack Time: 1 ms to 30 s
Decay Time: 1 ms to 30 s
Sustain Level: 0 to 100%
Release Time: 1 ms to 30 s
Release: On/Off
LFO
LFO Panel Features: Rate control, VCO LFO Amount, and VCF LFO Amount
Controls
VCO 2 Frequency: Sets the frequency offset of VCO 2 from VCO 1 from -1 Octave to +1 Octave, Center is unison with VCO 1
Oscillator 1 & 2 Saw/Square Waveform Selector: Selects a Sawtooth wave (LED Off) or Square wave (LED On) Signal for VCO 1 and 2
VCO 1 Level: Sets the level of VCO 1
VCO 2 Level: Sets the level of VCO 2
VCF Cutoff: Sets the Cutoff Frequency of the 4-pole Moog Low-pass VCF from 20 Hz to 20 kHz
VCF Resonance: Sets the gain for the amount of signal from the output of the VCF fed back to the input of the VCF, This creates a peak in frequency response at the Cutoff Frequency that can be increased all the way to self-oscillation
VCF EG Amount: Bi-polar control sets the (+) or (-) amount of Envelope Generator modulation of the VCF, Center is no Envelope Generator modulation
LFO Rate: Sets the frequency of the LFO, Range is from 0.01 Hz to 100 Hz
LFO VCO Amount: Sets the amount that the LFO modulates the VCO
LFO VCF Amount: Sets the amount that the LFO modulates VCF
VCA EG Attack: Sets the attack Time of a Minimoog-style ADSR Envelope Generator used to modulate the VCA, Time ranges from 1 ms to 30 s
VCA EG Decay/Release: Sets both the decay time to the sustain level and release time of a Minimoog-style ADSR Envelope Generator used to modulate the VCA, Time ranges from 1 ms to 30 s, Release segment of the EG is enabled by Release On/Off switch
VCA EG Sustain: Sets the sustain level of a Minimoog-style ADSR Envelope Generator used to modulate the VCA
VCF EG Attack: Sets the attack time of a Minimoog-style ADSR Envelope Generator used to modulate the VCF, Time ranges from 1 ms to 30 s
VCF EG Decay/Release: Sets both the decay time to the sustain level and release time of a Minimoog-style ADSR Envelope Generator used to modulate the VCF, Time ranges from 1 ms to 30 s, The Release segment of the EG is enabled by the Release On/Off switch
VCF EG Sustain: Sets the sustain level of a Minimoog-style ADSR Envelope Generator used to modulate the VCF
Release On/Off Switch: Enables (LED On or Disables (LED Off) Release segments of both Envelope Generators
Glide On/Off Switch: Enables/ Disables the Glide function
Glide: Sets the rate of Glide when the note controlling the Minitaur changes
Volume: The Master Volume of the Minitaur's synth engine
Fine Tune: Adjusts the frequency of the VCOs +/-1 semitone
MIDI Indicator LED: Indicates incoming MIDI activity
LFO Rate Indicator LED: Indicates the rate of the LFO
I/O
12 VDC power inlet, accepts 12 VDC, tip positive
Monophonic Audio In: 1/4" / 6.3 mm, TS unbalanced, accepts 4 dBu line level signal
Monophonic Audio Out: 1/4" / 6.3 mm, TS unbalanced
Headphone Jack: 1/8" / 3.5 mm, TRS stereo mini-jack
Control Voltage Inputs:
Pitch CV: 1/4" / 6.3 mm TRS, 0 to 5 V
Filter CV: 1/4" / 6.3 mm TRS, 0 to 5 V
Volume CV: 1/4" / 6.3 mm TRS, 0 to 5 V
Gate: 1/4" / 6.3 mm, 5 V trigger
MIDI Input: 5-pin DIN
MIDI I/O: USB
Conversion
CV to MIDI Conversion: Yes
Operating System
Flash upgradeable via MIDI Sysex
Power
100-250 VAC, 50/60 Hz, +12 VDC
Power Consumption
7 W
Dimensions
3.1 x 8.8 x 5.1" / 7.9 x 22.2 x 13.0 cm
Weight
2.5 lb / 1.2 kg
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 63731656833

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 1753 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
O
Verified Purchase
Oulu family
Pawtucket, US
★★★★★ 5
Good value for the money.
Color: Black, Size: 6 Panel
This partition package is a great value. I looked at many options and this one had long length to cover an entire room with the six partitions. The pieces went together easily, took about 30 minutes to assemble and has the needed Allen wrench included. It is stable with no fear of being easily knocked down. The black fabric does not completely hide everything and if there is a light on the inside, it can illuminate what is going on. It does the job but if you wanted complete privacy you would need thicker material. Overall it does what I need in that it make a TV room into a kind of guest room of sorts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
N
Verified Purchase
nickmarine
San Leandro, US
★★★★★ 5
Worked amazing during christmas
Color: Black, Size: 6 Panel
We had a ton of people over for Christmas so I had to make an extra place for someone to sleep so I used these and surrounded an air mattress and made a small shelter basically. The dividers are light but sturdy , not heavy duty of course but not expected for this price. They do an excellent job of blocking out light and are not see thru and worked very well. Assembly was straight forward and even comes with an included wrench but I used my own to speed the process. 100% satisfied
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2025
S
Verified Purchase
SomeoneOutThere
Houston, US
★★★★★ 4
Satisfactory
Color: Black, Size: 6 Panel
Everything was advertised. But the box it was shipped in was torn up pretty bad and taped up to compensate. Nevertheless, the product itself was not damaged.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2025
A
Verified Purchase
Amazon Customer
Birmingham, US
★★★★★ 5
Easy to use.
Color: Grey, Size: 6 Panel
These are easy to put together and to use. We have used them with all the panels. We have also used them broke down into 2 and 3 panels. They work well for blocking views. They don't block noise or help quiet the room being used, however. Only bad thing about them. We use them for our Auxiliary meetings.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 11, 2025
C
Verified Purchase
C.W.
Chelsea, US
★★★★★ 5
Easy to assemble. Still used for over a year 🙌🏾
Color: White, Size: 6 Panel
Everything is perfect! I would buy again in other colors and heights if I need additional separation in the basement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 7, 2026

recommand products

Stahlwille 03110050 - Llave de vaso destornillador 1/2" T50 L.55mm
27.60
Pokemon Pokeball Bento Box
24.90
VBW 87966166 - Alicates para bombas de agua L.250 mm
34.60
Stahlwille 02620020 - Llave de vaso 3/8" 5/16" L.32 mm
28.10
Stahlwille 03070012 - Llave de vaso para destornillador 1/2" 12 mm L.60 mm
29.10